Certified Backflow Assembly Testers (BAT) On Call in Richland
Direct Phone Dispatch: (253) 201-3775
Certified Cross-Connection Testers • Richland, WA

Certified Backflow Testing & Repair in Richland, WA

Backflow prevention assemblies safeguard public and residential potable drinking water supplies against hazardous chemical, fertilizer, and pathogen contamination. Washington Plumbing provides certified annual backflow testing, precision rebuilds, and direct municipal report filing with the City of Richland Water Department.

Why Annual Backflow Testing Is Legally Mandated in Washington

Under Washington State Administrative Code (WAC 246-290-490) and City of Richland municipal utility regulations, all cross-connection control devices must be inspected and certified annually by a state-certified Backflow Assembly Tester (BAT). A cross-connection is any actual or potential physical link between a potable drinking water system and an unapproved source containing contaminants or pollutants.

Backflow typically occurs through two distinct hydraulic mechanisms: back-siphonage, where a drop in municipal water main pressure (caused by water main ruptures or firefighting demand) creates negative vacuum pressure that pulls non-potable liquids backward into supply pipes; and back-pressure, where downstream systems (such as pressurized irrigation booster pumps or commercial boilers) generate pressure exceeding city supply levels, pushing contaminated fluids into the clean water distribution line.

Assemblies We Test, Rebuild, and Certify in Richland

Our licensed testing technicians test and calibrate all residential and commercial backflow assembly types:

  • Pressure Vacuum Breakers (PVB): Common on residential underground sprinkler irrigation systems throughout South Richland and Badger Mountain neighborhoods.
  • Double Check Valve Assemblies (DCVA): Sub-grade in-ground vaults protecting residential fire suppression lines, multi-zone lawn irrigation, and light commercial properties.
  • Reduced Pressure Backflow Assemblies (RPBA / RPZ): High-hazard commercial cross-connections for restaurants, medical facilities, automotive shops, cooling towers, and boiler feed lines.
  • Spill-Resistant Vacuum Breakers (SVB): Indoor applications where vertical space is constrained and minor water discharge cannot be permitted.

Received Your Annual City Backflow Notice?

Schedule your certified testing today. We handle all precision gauge testing, repairs, and electronic filing directly with the City of Richland.

Direct Phone Dispatch: (253) 201-3775

Our Certified Testing & Municipal Compliance Process

Our Washington State certified testers execute rigorous multi-step diagnostic evaluations using precision calibrated differential pressure test kits:

  1. Initial Physical Inspection: Checking assembly serial numbers, installation orientation, clearances, and verifying shutoff valves hold tight without weeping.
  2. Differential Pressure Differential Verification: Attaching high-precision hoses to test cocks, isolating internal check valves, and verifying that springs seat tightly at code-specified minimum PSI differential values.
  3. Relief Valve & Air Inlet Testing: For RPBA and PVB assemblies, verifying that air inlet check valves open cleanly and atmospheric relief valves discharge accurately before line pressure reverses.
  4. Immediate Component Rebuilding: If an assembly fails testing due to calcium mineral grit or worn rubber disc poppets, our service trucks carry factory rebuild kits to service seats, springs, and diaphragms on the spot.
  5. Official Report Filing: We electronically complete and submit the official Washington State cross-connection test report directly to the City of Richland cross-connection office on your behalf.

Backflow Testing Frequently Asked Questions

Why must backflow preventers be tested every year?

Backflow preventers contain sensitive internal mechanical moving parts, including stainless steel springs, rubber check valve discs, and diaphragm seals. Exposure to grit, hard water scale, and continuous pressure causes seals to wear over time, which can allow contaminated water to bypass the valve unnoticed unless tested under calibrated pressure.

What happens if a homeowner ignores their annual backflow test notice?

The City of Richland Water Department issues compliance warning letters. If the assembly remains untested or uncertified beyond the deadline, municipal water utilities are legally authorized to shut off potable water service to the property to protect the public drinking supply.

Should backflow assemblies be winterized in Richland?

Yes. Exterior backflow assemblies (such as PVBs on lawn irrigation lines) are installed above ground and are extremely vulnerable to splitting during winter freezes. They must be blown out with compressed air and properly drained before the first hard frost.

Direct Phone Dispatch: (253) 201-3775